Waveshare E9 Скачать руководство пользователя страница 48

Страница: 48 / 95

Waveshare Electronics

Address: Rm 813, Dynamic World Building, Zhenhua Rd, Futian District, Shenzhen, China

TEL: +86-755-83040832 Web: http://www.wvshare.com/

FAX: 86-755-83042572 E-mail:

[email protected]

Chapter Seven Ubuntu Functional Test

This chapter is mainly for beginners to learn how to use the system ubuntu 12.04 and test the board function.

Maybe some test interface is different from the actual interface when using, but as long as test it according to the

following tips, then board function is no problem at all.

Set the boot mode of E9 mini PC as EMMC, power on and long press the power button. The red power light near

the power button is on (If it is not long press the power button, the power light is not on at all). By this, it means

that the board uboot has run up. Users can enter and set uboot; or wait for the system boots automatically.

7.1 Display Test

The E9 ubuntu supports 7inch/5inch LCD display, VGA, HDMI display. Setting Resolution according to the

tips in Chapter8.1, and choose LCD, or VGA or HDMI display according to your own display in hand. The

display shows like this if it’s normally boot:

Содержание E9
































































































Результаты поиска

Содержание E9

Отзывы:

Бренды по названию

Популярные бренды

Waveshare E9, Руководство пользователя

Результаты поиска

Содержание E9

Отзывы:

Бренды по названию

Популярные бренды