Barcode Scanner Module User Manual
32
/
57
Rev1.0 Date:180621
2) Make sure the setting code function is enable, if not, open it.
3)
Scanning “Modify the Length M”
4) scanning setting co
de: “0”, “D”
5) Scanning “Save”
6) Scanning “Only Send Start Segment”
⚫
D
ecoding Data: “1234567890123ABC”, output the last three bytes: “ABC”
(Only End)
1)
Query characters table, get the HEX value of “3” (DEC) is “03”
2) Make sure the setting code function is enable, if not, open it.
3) S
canning “Modify the length N”
4) Scanning setting code: “0”. “3”
5) Scanning “Save”
6) Scanning “Only Send End Segment”
⚫
D
ecoding Data: “1234567890123ABC”, output the center four bytes “0123”
(Only Center)
1) Query characters
table, get the HEX value of “10” (DEC) and “3” are “0A”
and “03” separately
2) Make sure the setting code function is enable, if not, open it.
3) Scanning “Modify the Length N”
4) Scanning setting code: “0”. “3”
5) Scanning “Save”