Waves Vocal Bender, Руководство пользователя

Страница: 10 / 12

Vocal Bender / User Guide
10
R
ATE
Sets the rate of the modulator. Display units and range are
dependent on the Rate Sync setting.
Range: 0.06 Hz to 30 Hz or 1/64 bar to 8 bars
R
ATE
S
YNC
O
N
/O
FF
Toggles the Rate knob values. When On, the rate of the LFO
is calculated by the Host BPM and is displayed in musical
notation. When Off, values are displayed in Hz.
P
HASE
Controls the starting position of the modulator.
W
ARP
Warps the speed of the modulator but keeps the overall timing of the cycle. When Warp value is lower than 1,
modulation will start at a slow pace and increase its speed toward the end of the cycle. When set above 1, the pace
is fast at start and then slows down at the end. Essentially, this is applying pulse width modulation on the cycle of
the modulator.
Range: 0.01 to 100 (a value of 1 is linear)
S
MOOTH
Applies smoothing to the modulation curve. Low settings result in distinguishable onsets and may result in clicks.
High settings smooth the overall modulation curve, and in some settings may result in very low energy.
Range: 1 to 1000
L
EVEL
The overall level of the modulator. When the Level of a modulator is set to 0, no modulation takes place.
Range: 0 to 1