Waves Scheps 73
User Guide
7
Low Frequency
toggles between four low frequencies.
Range:
35Hz, 60Hz, 110Hz, 220Hz
Default: 110 Hz
Low Gain
sets the amount of low frequency boost or cut.
Range: +/- 18 dB in 0.1 dB increments
Default: 0 dB
Low On/Off
activates low band processing.
Range: On, Off
Default: On
HP Filter Frequency
toggles between four high-pass filter frequencies (third order: -18dB per oct.).
Range: 50Hz, 80Hz, 160Hz, 300Hz
Default Setting: 50 Hz
HP Filter On/Off
activates the high-pass filter.
Range: On, Off
Default: Off
Note: The high-pass band is the only one to have separate On/Off control for left and right, this is due
to the fact that it does not have a 0 position (Off).
Phase
reverses the phase of the signal.
Range: On, Off
Default: Off
Note: The phase will be reversed after the EQ stage
EQ In/Out
activates the whole EQ processing.
Range: In, Out
Default: In
Monitor
controls the source of the monitor output. (
Stereo component only
)
•
Stereo (ST) and Duo modes:
o
Left (left side only)
o
Mono (stereo signal summed to mono)
o
Stereo
o
Right (right side only)
•
MS mode:
o
Mid (left plus right)
o
Mono (stereo signal summed to mono)
o
Stereo
o
Sides (left minus right)
Содержание SCHEPS 73
Страница 1: ...WAVES ANDREW SCHEPS SCHEPS 73 USER GUIDE...
