Sensitivity Section
The Sensitivity LED’s 3 colors indicate when appropriate levels are reached:
o
LED Off (too low)
o
Green
(good)
o
Yellow
(optimal)
o
Red (very hot)
Turn the Sensitivity Control until the LED lights up. For best results, use the section of
your track with the highest peaks.
In most cases, the Sensitivity LED indicates that your levels hit the processor in a way
that will give you the intended output result. However, it’s important to keep in mind that
optimal results for your source material may be achieved even when the Sensitivity LED
does not display “optimal” levels (yellow). As always, trust your ears.
Please note: Since the Sensitivity ranges of the Hi Strings, Lo Strings, and Piano differ
from the default settings, they are labeled “Sens 2” for automation purposes.
Main Section
The Main Section gives you control over basic dynamics & EQ. All processing is
influenced by this section. The JJP Strings & Keys mono-to-stereo component includes
a Pan control.
Main Fader
The Main Fader controls the Main Section direct level.
Center Section Faders
The Center Section faders represent auxiliary returns with additional processing, sent
from the Main Section, pre-fader. Above each fader, there is a dedicated mute button.
It may help to think of each plug-in as a mini-mixing console.
Please note: Certain faders may change, depending on the selected Type. This is
intentional, and represents the actual processing JJP uses for that source or instrument.
Waves JJP Strings & Keys
User Guide
- 7 -
Содержание JJP
Страница 1: ...WAVES JJP STRINGS KEYS User Guide...