Waves GTR Ground, Руководство пользователя

Страница: 6 / 17

Waves GTR Ground – User Manual
5
Getting Started
To start working with Waves GTR Ground, complete these
steps:
1. Connect the included power supply to the electrical
outlet.
2. Connect the round power jack to the GTR Ground
power input (located on the right side of the GTR
Ground, below the 2nd expression pedal). The GTR
Ground displays will illuminate, and show ‘GTR’ and
‘Waves Ver 1.1’ (or higher) across the top and bottom
displays. After a few seconds, the word ‘GROUND’ will
be shown across the bottom displays. The GTR Ground
is now ready for operation.
3. Connect the GTR Ground USB “B” type connector to
your computer’s USB port using the included cable (or
any USB cable). The computer will automatically
detect the device and install the necessary drivers.
4. Once the USB connection has been made, the GTR
Ground will show ‘GTR’ in the top display, ‘Waves Ver
1.1’ (or higher) in the bottom left display, and ‘USB’ in
the bottom right display.
At this point, GTR Ground has registered its MIDI port with
the operating system and is ready to use.
Depending on how you want to use the GTR Ground, the
options are as follows:
1. Using GTR Ground to control GTR Standalone.
This is the primary application of GTR Ground and
utilizes its full features, including GTR Ground display
updates with current preset information.
2. Using GTR Ground to control the Waves GTR
plug-In.
Waves GTR software launches within a host
application, which requires the routing of GTR Ground
messages to the plug-in through the host. Feedback of