First steps with your player EVP380
EVP380
24
Oct 2021
Version : 2.1 (for firmware 1.11 or higher)
The separated input can be configured in the menu, by default it trigs folder 001.
8 input contacts trig 255 first folders according to a binary order.
Folder N°001 is triggered by separated input contact or by input 1 in the group of 8.
By default 8 input contacts will trig the following folders:
Entry 1 : Folder 001
Entry 2 : Folder 002
Entry 3 : Folder 004
Entry 4 : Folder 008
Entry 5 : Folder 016
Entry 6 : Folder 032
Entry 7 : Folder 064
Entry 8 : Folder 128
If contacts are actuated simultaneously, then 255 folders can be trigged. N°001 to 255 correspond to
the combination of 8 input contacts.
001 : activate input N°1
002 : activate input N°2
003 : activate inputs N°1 + N°2
004 : activate input N°3
005 : activate inputs N°3 + N°1
006 : activate inputs N°3 + N°2
007 : activate inputs N°3 + N°2 + N°1
008 : activate input N°4
009 : activate inputs N°4 + N°1
and so on following the binary system.
7.3. Identify the player on your local network
Use the remote control, press menu and go to System settings > Network to get access to the current IP
address of the player.
As an alternative, select OK or Info and read the IP addressat the bottom right of your screen. QR code
gives you direct access to the remote administration from a smartphone connected to the same network.
Example to trig folders thanks to 8 input contacts
