WaveRider LMS4000, Руководство пользователя

Страница: 181 / 282

APCD-LM043-4.0 163
Appendix C Command-Line Syntax
This appendix describes the various LMS4000 commands and syntax, and consists of the
following sections:
• Command-line Syntax Conventions and Shortcuts on page 163
• CCU Command-line Syntax on page 165
• EUM Command-line Syntax on page 174
NOTE: The help command on the CCU or EUM may display additional
commands that are not listed in the following tables. WaveRider
recommends that you use only commands listed in this Appendix.
CAUTION: When entering IP addresses in the CCU or EUM,
note that a leading ‘0’ forces the CCU/EUM operating system to
interpret the entry as octal rather than decimal. For example,
pinging 10.0.2.010 actually pings 10.0.2.8
To Access the Command-line Interface
• In the WaveRider Configuration Utility, click the Windows menu and select Use
Terminal Screen.
Command-line Syntax Conventions and Shortcuts
Table 44 shows the typographical conventions used to represent command-line syntax. Table
45 provides a list of shortcuts and methods to get help on commands. To execute a command,
type the command and press Enter.