19
The “Activity” Tab
12
One of the best features of the GO G41 is that it actively listens and decodes the cellular
signals before amplifying. You can find out more about the system's status at any given
moment in the “Activity” tab.
The most important information is summarized at the
top of the screen, under the "Overview" section. The
information here is divided into two "radios" – the GO
G41's two radios are what allow it to amplify up to
two bands simultaneously.
For each radio, the activity tab tells you if it is
"scanning," or if it has found a signal and started
"boosting." When the radio is scanning, you'll notice
that the frequency changes often. Once it's boosting,
the frequency will no longer change.
Once the GO G41 is boosting on one of the radios,
the Wave app will show a gauge for signal quality,
signal strength, and antenna separation.
Signal quality and signal strength are determined
by your outdoor antenna’s location and direction.
Antenna separation is determined by the separation
between the indoor antennas from to the outdoor
antenna.
The goal during installation is to get all gauges fully
green. But sometimes, despite your best efforts,
these gauges may remain red or yellow. That's okay,
just try to fill the gauges as much as possible.
The “Send Log” button
allows you send a diagnostic
log from your device if our
support team needs one.