•
Average interval:
time interval in seconds for calculating an average. Value
between 1 and 1800 seconds (60 minutes).
Note:
between 6 and 30 minutes the allowed interval is in multiples of 5 seconds.
Between 30 minutes and 60 minutes, in multiples of 10 seconds.
•
Enable snooze alarm:
with this option activated, when the ON/OFF button is
pressed after an alarm sounds, it will be muted for 1 minute.
•
Enable vibrate on double tap function:
if this option is activated and your
WaveMon RF
is on, the device will vibrate every time the user pokes it twice.
Second section:
Program parameters:
•
Date format:
used to select the day/month/
year format.
•
Time format:
12 or 24 hours.
•
Language:
used to select the language.
The program must be rebooted to apply the
changes made.
Third section:
Updating the firmware for the device:
Select the .bin file of the new firmware and wait
for the device to be updated. Do not switch the
device off while the firmware is being updated
and make sure that the device has sufficient
battery charge before starting the update.
Fourth section:
Limit:
Some models have the option to select the
limit for public or workers. Please note that
public limits are not compatible with the
magnetic sensor so only electric field will be
registered if a public limit is selected.
User’s Manual
Personal equipment WaveMon
P.
16
Содержание WaveMon RF
Страница 2: ......
Страница 32: ......
Страница 33: ...www wavecontrol com...
Страница 34: ...Safety Quality Service 34 93 320 80 55 www wavecontrol com info wavecontrol com...
