2
INSTALLATION/START-UP
2.1
Mounting the modem
For mounting the modem, bind to the body the holding bridles
according to the schema below
:
Figure 2
Modem mounting
2.2
Installing the modem
To install the modem, plug the device on a DC power supply (for automotive application,
connect the device on the permanent « + » and insert the SIM card in the holder).
Make sure that an antenna is connected.
In order to extract or to insert the Micro SIM card, it is necessary to press the SIM holder ejector with a sharp element (a pen
for example).
If this sequence is not respected, the SIM holder could be damaged.
INSTALLATION/START-UP
Wavecom WMO2 Modem
3
Note:
- To be attached to a plain surface
- Screw head max. height: 2mm
2
m
m
Holding bridles
2
mm
GUIDE
19/04/99, 9:21
6
