11
TnP Prime
User Manual
Wavecom
You can now set up your User Account - this is your individual profile. Once your details are complete, tap
ADD to create your account. Confirm your details are correct, then tap CONFIRM to finish registering your user
account.
When you start WinPATS for the first time you’ll be required to perform a data sync. This creates a new cloud
database for you, or connects your WinPATS App to your company’s existing database. If your database has
many items, this may take up to 5 minutes, but usually only takes a few seconds.
Connecting via Bluetooth
To control your TnP Prime via Bluetooth, you will need to perform a short setup procedure. Ensure you have
both your tablet with WinPATS installed, and your TnP Prime in front of you.
Go to the Bluetooth settings in your Tablet’s settings menu
Ensure that Bluetooth is enabled, then select your TnP Prime from the list of available devices (ensure you
select the correct tester by referring to the serial number. Your TnP Prime’s serial number is located on the side
of your tester, and on the rear cover of this booklet).
You may now be prompted to pair your two devices using a PIN code. If so, your TnP Prime will display a code
on the screen. Enter this code into WinPATS and tap OK. You will be asked to confirm the connection - tap
Confirm after checking the details are correct.
Note: If you have any issues with the PIN code, you can disable this function from the TnP Prime settings menu. Power on
your TnP Prime, then hold Enter and press F2 to open the settings menu. Navigate to ‘Bluetooth Configuration’ and press
Enter. When prompted with ‘Use Security PIN for Bluetooth’ select ‘Disable’ by pressing F3.
Go to the WinPATS App
To connect your TnP Prime, go to the Test menu in the WinPATS App (at the top of the screen). You should be
prompted to connect a Wavecom Appliance Tester as soon as you open the Test Menu for the first time. Tap
‘BLUETOOTH’ to begin the Bluetooth setup process.
WinPATS
USB OTG
Cable
USB-A to
USB-B
Cable
USB-B
USB-A
For devices with USB-C port, a USB-C OTG Cable is required
(not supplied with Tester)
Micro USB
