Open AT
®
V3.13 Release Note
Restrictions & Known Problems
confidential ©
Page :
12 / 14
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged
without prior written agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à
des tiers sans son autorisation préalable.
Id
Description (What/When)
ANO34708 If an application starts to read backtraces, the application have to read all backtraces, or else
it is impossible to retrieve all backtraces.
ANO34986 With the Ping GPRS sample, if more than 256 ping packets are required, the counter of
packets restarts from 1 and endless loops.
ANO34992 On the ADL_FCM_EVENT_V24_AT_MODE_EXT event (with a port different than UART1),
even if the handler returns FALSE, the port is switched to AT mode, instead of staying in Data
mode.
ANO35041 RTK exception backtraces are stored (without any Wireless CPU reset) when performing a
GSM data call with the corresponding ADL FCM flow subscribed.
ANO35043 ADL_RET_ERR_UNKNOWN_HDL is never returned by adl_dacUnsubscribe.
ANO35071 When installing the Open AT
®
SDK, on some PC configurations, something goes wrong
during the already installed components detection (an error message is displayed); but the
components can then be selected normally and the setup process continues normally.
ANO35411 If an external application uses a basic concatenated command (eg. at&fe0q0v1) including &F,
Z or &W commands, it is not possible anymore to modify the AT+CREG and AT+CGREG
commands state without a Wireless CPU reset.
ANO35561 Sending some concatenated commands in a specific sequence, the responses returned by
the Wireless CPU are not in the good order. The commands responses should be returned in
the right order.
ANO35997 Displayed value in TMT is wrong when a "float" is passed in argument with TRACE function.
Error occurs when Open AT
®
application is compiled with a GCC compiler.
ANO35429 When the FCM service is subscribed on one port, and the serial link state is set back to AT
mode through the +++ sequence, if the ATO command is entered on any other port, the
Wireless CPU resets.
ANO35467 With the Duplex_Data sample, an adl_memRelease error occurs in full duplex mode after
several call operations, if master and slave Wireless CPU roles are reversed.
ANO35735 With the Duplex_Data sample, if the master Wireless CPU starts a full duplex call without
modifying the default data packets number, the slave Wireless CPU does not send data
packets.
ANO35795 The LCD_Game sample crashes when the AT+GAMESTART=1 command is used.
ANO35826 If some special characters are used for project name (&,|) in the Wizard, the project creation
fails.
ANO35828 It is impossible to use the sample LCD_clock and Game with the new Q24 series.
ANO35684 When a source file name includes a space character, this one is not correctly processed by
the IDE: source file names cannot include a space character.
ANO33533 When the Open AT
®
SDK is installed for the first time on a computer, Start menu shortcuts do
not work. Install Open AT again solves the problem. Shortcuts can also be modified by
removing the 'C:\' statement before the %WMATHOME_DOS% name.
ANO33784 AT+CMGW command freezes when used with a single digit phone number with a running
Open AT
®
application (e.g. AT+CMGW=1).
ANO36121
After a backtrace reset, IOs reserved for SIM level shifter are not viewed from
Open AT
®
application
.
