8
Charging A Battery
1. Confirm that the charging pod and battery are compatible.
2. Connect the charger to power with the power supply included.
3. Place the battery to be charged in the charging pod. The battery may also be
charged while attached to the radio.
4. When a battery is placed in the charging pod and while charging, the status LED
will illuminate RED with no flashing to indicate normal charging.
5. If the status LED is red and flashes, a fault has been detected. The flash pattern
represents a specific fault condition. If the status LED is orange (solid or flashing),
an advisement is being provided. See section
Fault Conditions & Advisements
for
details.
6. When the battery is charged to 80% of capacity, the status LED will change to
GREEN and begin to flash. It is recommended that the battery be charged to at
least 80% capacity before use.
7. The charge status LED will illuminate GREEN with no flashing when the battery
is fully charged.
