TROUBLE SHOOTING
1. There is no rotation and display after plugging into an electrical outlet.
Ensure that the AC adaptor is plugged in properly and batteries are installed properly.
2. There is no Caller ID information being received.
Check that Caller ID service is subscribed from Telephone Company. Ensure that
telephone cord is plugged in correctly.
3. There are sounds of vibration coming from base.
Vibrations coming from the Info Globe are normal. However, check that the device is
standing firmly on a level surface and that there are no other objects close to the Info
Globe that may be producing the sound.
4. Floating display looks faint
Check that AC adapter has been plugged in properly. Place Info Globe against a dark
background to obtain maximum illumination from floating display.
5. Time and date are not retained during power outage.
Replace battery and install a fresh one properly.
CONSUMER INFORMATION
This equipment complies with Part 68 of the FCC rules and the requirements
adopted by the ACTA. On the bottom of this equipment is a label that contains,
among other information, a product identifier in the format US:
DDKNDO1BOL3200NNN.
An applicable certification jacks Universal Service Order Codes (USOC) for the
equipment is provided (i.e., RJ1IC) in the packaging with each piece of approved
terminal equipment.
A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular plug
is provided with this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone
company. The REN for this product is part of the product identifier that has the
format US: DDKNDOIBOL3200NNN. The digits represented by 01 are the REN
without a decimal point (e.g., 03 is a REN of 0.3). The REN is separately shown on
the label too.
If this equipment OL3000 causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of service may
be required. But if advance notice isn't practical, the telephone company will
notify the customer as soon as possible. Also, you will be advised of your right to
file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes in its facilities, equipment, operations
or procedures that could affect the operation of the equipment. If this happens the
telephone company will provide advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
Please follow instructions for repairing if any (e.g. battery replacement section);
otherwise do not alternate or repair any parts of device except specified.
Connection to party line service is subject to state tariffs. Contact the state public
utility commission, public service commission or corporation commission for
information.
