2
PURIFICATION STAGES
Stage 1:
Built in smart Pre-filtration, a combined filtration of
Polypropylene
and five- micron
CTO
filter. Polypropylene filter removes dirt, impurities, rust, slime, sand and grit.
Stage 2: CTO
removes Chlorine and odour. A CTO filter will produce water that is much clearer in
colour with a more appealing taste.
Stage 3:
Coconut shell Activated Carbon filter is a method of filtering water that uses Activated
Carbon Granules to remove contaminants and impurities using chemical absorption. Each
Granule of carbon provides a large surface area allowing contaminants the maximum possible
exposure to the active sites within the filter media, so that the water becomes sweeter in taste.
Stage 4: RO Membrane
is a water treatment process that removes contaminants from water by
using pressure to force water molecules through a semipermeable membrane, which is 0.001
micron thick. It can effectively filter the small organic matter and other contaminants which are then
filtered out and flushed away, leaving you with clean and delicious drinking water.
Stage 5: UV
Disinfecting our water with Ultraviolet light is exceptionally simple, effective and
environmentally safe. UV in the tank can kill up to 99.99% of harmful microorganisms without
adding chemicals or changing the taste or odour of the stagnant pure water in the tank. It also does
not let the harmful viruses or bacteria grow in our pure water tank. This makes the taste and colour
of the water remain unaltered.
Stage 6: Ionizer
Chamber The Japanese titanium plates delivers the variants of pH with the help
of electrolysis process.
PURIFICATION STAGES - ION - Z
2- IN- 1 PRE-FILTER
SEDIMENT &
CARBON BLOCK
BOOSTER
PUMP
RO/ UF MEMBRANE
PRE-ACTIVATED
CARBON
LED UV INSIDE THE
WATER STORAGE TANK
IONIZER
CHAMBER
FLOAT VALVE