Wave-radio iGPS-M, Руководство пользователя

Страница: 5 / 13

iGPS-M USER’S MANUAL
5
Troubleshooting
When your iGPS-M receiver could not operate, please follow the instruction to
do the troubleshooting as below.
1. iGPS-M receiver’s LED is not flashing
l
It means iGPS-M does not have power supply. Please check if the connector
plugs in properly as the step II.
2. iGPS-M receiver’s LED is flashing, but the connection between iGPS-M receiver
and the E -map can not be established. Please make sure the settings of COM
Port Number and Baud rate are correct.
l
Most of E-map provides scan function to search COM Port. Please scan
it for the correct COM Port number that iGPS-M receiver is utilizing.
l
If a RS232 cable is used to connect to PC/Lap top, the COM Port number
would COM1 usually.
l
The default Baud rate is 4800.
l
If a USB cable is used to connect to PC/Lap top, please make sure the
UBS driver is installed successfully.