7
14)
Complete the remaining 5 sections of the purlins in the same manor see Figure 13.
Figure 13
15)
Roof thatch is precut to the following lengths: #1-39’, #2-29’, #3-19’. Attach the thatch to the
corresponding boards as shown in Figure 14 using staples. At each roof truss where the board
changes directions, make a loop in the thatch as shown in Figure 15 and staple on both sides of
the loop. Then push the loop down and staple the center down in place as shown in Figure 16.
Staple thatch every 4 inches on every perlin.
Figure 14
