WattWheels ALPINE 2019, Руководство пользователя

Страница: 3 / 26

LCD DISPLAY FEATURES
The image shows the various features and information displayed on the wireless remote. The display is
controlled using the 5-button remote mounted on the left side of the handlebar. For more
information on the LCD display and operation please refer to the manual included. This is also on
located on our website at
www.wattwheels.co.nz/manuals
LIGHTS
To activate the lights press on the light button located on the keypad. A little icon should appear at
the top of the display indicating the light is on. To turn off , press down the light button again.
BATTERY DISPLAY CAPCITY
The LCD readout on the handlebar of your Alpine Bike features a battery capacity gauge (much like
the fuel gauge on an automobile). It is recommended that users stop operating the bike on electric
once the bike gets near 1%. Remember you can still ride without using the electric motor or display!
THROTTLE
The Throttle is located on the left-hand side of the handlebars in the form of a thumb piece. Please be
aware using the throttle will drain the battery much quicker than normal riding. Also, the throttle is
not designed to climb steep hills. To get the maximum amount of power from the bike on steep
gradients select the highest level of PAS and use the highest gear.
PAS (Pedal assist modes)
Pedal assist modes start from 1 and go up to 5. This can be changed if required. Refer to the Display
manual. PAS level 1 is the first pedal assist level and will give you some slight assistance. The rider
however will still be doing most of the work. As you select the higher levels, the assistance will
increase with level 5 basically doing all the work for you. Using higher levels of PAS will drain the
battery faster. The recommended level is PAS 2-3 to ensure maximum battery life.