Step 1. Mount the A6M and the PMC Meter
Step 2. Follow the wiring diagrams
Step 3. Watch the Onboarding video
Step 4. Use Onboarding to commission the Auditor
Step 5. Apply the silver stickers
Step 6. Take photos of your installation
STEPS TOWARD A
SUCCESSFUL
INSTALLATION
MAKE SURE YOU HAVE AN ONBOARDING ACCOUNT
Make sure you have access to onboard the device before going to the site. See the
'HOW TO USE ONBOARDING' page for more info.
TAKE SPARE PARTS
Take a spare A6M+One pack if you have one and an external high-gain antenna.
LABEL THE CTS ON BOTH ENDS
Label all the CTs on both ends before you install. This will save a lot of headaches if
you need to retrace any cables for problem-solving.
APPLY THE SILVER STICKER
You will have two silver serial number label stickers. Apply one on the front of the
Auditor (don't block the lights) and one below the circuit breaker feeding it.
TIPS
© 2023 Wattwatchers Pty Ltd ABN 47 123 010 588 v2.0 Page 6/14
