Call 800.879.8585 for Technical Support
SENSOR OPERATING MODES
Sensor #1 Sensor #2
Light Fixture
Auto-ON
Auto-ON
The load turns
ON
and
OFF
automatically based
on occupancy detection by either one of the
sensors. The sensors keep the load
ON
until no
motion is detected and will use the time delay
of the sensor with the lowest value. At any time,
the light can be turned ON and
OFF
using the
ON/OFF
button of any one of the sensors. If the
load is turned
OFF
manually by pressing either
one of the
ON/OFF
buttons, the unit will enter
Presentation mode.
Auto-ON*
Manual ON* The load can only be turned
ON
automatically by
the sensor set in
Auto-ON
mode. The sensors
keep the load ON until no motion is detected
and will use the time delay of the sensor with
the lowest value. There is either a 30 second
re-trigger delay for the sensor set in
Manual-
ON
mode or instant re-trigger for the sensor
set in
Auto-ON
mode. After the re-trigger delay
elapses, the
ON/OFF
button of the sensor set in
Manual-ON
mode must be pressed to turn the
load back on unless the sensor set in
Auto-ON
mode detects motion. If the light is turned
OFF
manualy by pressing the
ON/OFF
button set in
Auto-ON
, it will enter Presentation mode.
Manual-ON
Manual-ON
The occupant must press the
ON/OFF
button on
either one of the sensors to turn the light
ON
.
The sensors keep the load
ON
until no motion
is detected and will use the time delay of the
sensor with the lowest value. There is a 30
second re-trigger delay, meaning the occupant
has 30 seconds to be detected for the sensor to
turn the load back on automatically. After the
re-trigger delay elapses, the
ON/OFF
button of
any one of the sensors must be pressed to turn
the load back
ON
.
* Although this configuration may be selected, it is not recommended.
