Wattson PIVOT, Руководство пользователя

Страница: 10 / 19

When placing the front wheel into the front fork, ensure the disc is properly seated
between brake pads.
Slide the front axel back through the fork WITH the brake mount and through the long
spacer and into the wheel. The short spacer will be on the side WITHOUT the brake,
between the fork and the wheel.
It may be useful to turn the fork slightly to make room for the short spacer.
Push the axel through the fork and place the washer before tightening the locking axel
nut (16mm nut and 12mm bolt). Do not over tighten.
Once the front wheel is mounted, you can attach the front fender above the wheel.
Remove the 4 small bolts and nuts placed towards the top of the forks.
Take the front fender and gently squeeze the sides together to place it in-between the
fork. The long side of the fender should face in the forward direction of the bike.
Mount the front fender into place with the 4 small bolts and nuts. Tighten with a
screwdriver. Do not over tighten.
Step Five: Installing Pedals.
The pedals are labeled with L and R on the base of the threaded portion. Be sure to
install these in the correct corresponding cranks or the threads may be damaged. Left
and Right pedals are determined from the perspective on the rider.
Use a 15mm wrench to tighten. The left pedal must be turned counter-clockwise to
tighten.
8