www.wattsmall.com
2
Assembly
Remove the heater and all the accessories from the carton.
Turn the heater upside down.
Position the wheel base assemblies between the end fins.
Attach them to the heater using the U-bolts and wing nuts supplied.
Tighten the wing nuts.
Turn the heater the right way up.
Operation
Place the heater on the floor at least 90 cm away from the wall and any other objects
such as furniture, curtains or plants.
(Make sure the power supply used corresponds to the one on the rating label)
With the thermostat control switch and the power setting switches in the '0' position,
plug the heater into the main power supply.
Room temperature can be adjusted using the thermostat simply. Turn the thermostat knob
clockwise, to increase the heat, and anti-clockwise to decrease the temperature, until you
reach the desired temperature.
Switch the heater to one of the following power settings.
a) Push switch one (I) 600W/800W/1000W/1000W
b) Push switch two (II) 900W/1200W/1500W/1500W
c) Push switches (I) & (II) two settings power working together.
The power switch lights up when activated.
