Box Wattsense - Installation Guide
10 / 23
• Connect also this gateway to the LON FT10 network.
Information to get in preparation for the configuration:
• Write down the Neuron-ID, brand and model of the equipment, and any identifying information. This information will be
necessary for the installation configuration and to retrieve data.
• If you have the NL220 software, export the LON database as an archive file or as an NLC file.
5 To connect the Box directly to the technical equipment in the absence of a BMS
• Prepare the list of equipment to be connected and their respective communication protocols.
• Collect the technical documentation of each manufacturer to know where and how to connect to its devices (user console,
configuration wizard, manufacturer’s site, etc.).
• Draw up an installation schematic.
5.1 The equipment communicates in Modbus IP
To connect only 1 equipment
• Make sure to have an Ethernet cable.
• Connect the cable to the Ethernet port of the Box ETH1 or ETH2.
