10
4.2.2 Drill 3 holes and insert 3 wall anchors into the mounting holes.
Place the holster wall dock, then screw and tighten 3 Type C (M4 x 30
mm) screws into the mounting holes.
5.2.1 How to the Enable the RFID Cards
When the charging station is on standby, plug in the connector to
your EV, and the LED will turn blue from purple.
The LED will be flashing green while charging.
When your EV is fully charged, the LED will be solid green, unplug
the connector and place it back into the holster.
5 Charging Operation
5.1 Plug-and-Charge Mode (Default)
5.2 RFID Mode
If you need an emergency stop while charging, please
press the RESET BUTTON then unplug the connector.