background image

Page 2

 

 

 
 
 
 

 

 

 

 

 
 
 

 
 

 

Thank you for your purchase of a state of the art Watts Reverse Osmosis (RO) water treatment system.

 Water quality 

concerns are becoming more of a focus for the public.  This Watts water treatment system has been designed and tested to 
provide you with high quality water for years to come.  The following is a brief overview of the system.

Your Reverse Osmosis System:

Osmosis is the process of water passing through a semi permeable membrane in order to balance the concentration of 
contaminants on each side of the membrane. A semi permeable membrane is a barrier that will pass some substances like 
clean water, but not other substances such as salts and minerals. 

Reverse osmosis uses a semi permeable membrane; however, by applying pressure across the membrane, it concentrates 
contaminants on one side of the membrane, producing clean water on the other. This is why RO systems produce both clean 
drinking water and waste water that is 

fl

 ushed from the system. 

Your system is a Four Stage RO which is based upon four separate treatment segments within one complete water 

fi

 ltration 

system. These stages are as follows:
  

Stage 1 – Sediment 

fi

 lter, recommended change 6 months.

The 

fi

 rst stage of your RO system is a 

fi

 ve micron sediment 

fi

 lter that traps sediment and other particulate matter 

like dirt, silt and rust which affect the taste and appearance of your water. 

Stage 2 – Pre-Carbon 

fi

 lter, recommended change 6 months.

The second stage contains a carbon block 

fi

 lter.  This helps ensure that chlorine and other materials that cause bad 

taste and odor are greatly reduced.  

Stage 3- Membrane, recommended change 1-2 years.

Stage three is the heart of the reverse osmosis system, the RO membrane.  This semi-permeable membrane will  take 
out salts, minerals, metals, bacteria, virsus, cysts, and much more.  Because the process of extracting this high quality 
drinking water takes time, your RO water treatment system is equipped with a storage tank.  

Stage 4-  Post Carbon Filter,  recommend change 12 months.

 

The post carbon 

fi

 lter is a granular activated carbon (GAC) cartridge using coconut shell carbon.  This 

fi

 lter                 

 provides 

fi

 nal polishing and assures good tasting drinking water.

System Maintenance

Just because you can not taste it, does not mean that it is not there. Contaminants such as lead, chromium, VOC’s and arsenic  
are undetectable to the taste.  Additionally, over time if you do not replace the 

fi

 lter elements, other bad tastes and odors will 

be apparent in your drinking water.  
This is why it is important to change out your 

fi

 lter at the recommended intervals as indicated in this system manual.  Should 

you have any further questions please contact the dealer that you purchased the unit from.

NOTE:  This  manual is used for several variations of the same system.  Your system may   
             vary slightly from the pictures or descriptions contained in this manual.  

 

  It is end users responsibility to ensure that this system is installed according to all  

            local codes and regulations.

Содержание WQC4 RO SERIES





















Отзывы: