5
QS-SH-Leak Defense 2216 2022-04-26 © 2022 Sentinel Hydrosolutions, LLC
In the
Home
scene all Leak Defense Systems* have a built in
warning mechanism that flow has exceeded normal, allowable use
and water is about to be turned off .
When you reach the
Home Time to Alarm
the system turns the
water off for 30 seconds and then re-opens the valve to confirm the
presence of a leak . If water has stopped flowing within 2 minutes of
the
Warning Cycle
and drops below the
Trip Rate
, then the timer is
reset . If water is still flowing after 2 minutes, the control panel audibly
alarms and shuts off the water until the alarm is cleared .
If you are running water and notice that pressure decreases temporar-
ily, just remember you can reset the system by turning the water off
for about 45 seconds before continuing use . This will give the system
ample time to turn the water back on and confirm flow has ceased
before resetting the
Time to Alarm
clock . If the system stills sees
flow it will assume a leak is present and will turn off water completely .
At any time the control panel or the app can be used to interrupt the
Warning Cycle
and reset the system .
The
Warning Cycle
is not available in the
Away
scene as the
system assumes no one is home and shuts the water off immediately
once the
Time to Alarm
is reached . This feature is only available in
the Leak Defense System .
*Except when hot and cold lines are monitored independently by separate Leak
Defense Systems.
WARNING CYCLE
