Comfort
Mode:
Use this mode to set your installation indefinitely in Comfort mode.
The room temperature and the humidity level are displayed all the time. If you press
you can see the setting
temperature and actual time.
You can adjust the comfort temperature for this zone with
and
keys. (Default setting 21°C)
Every others zones will follow there thermostat setting temperature.
Automatic
Mode:
In this mode your installation follows the program assigned for each zone. Press
to see the program followed of
the current zone,
The room temperature and the humidity level are displayed all the time. If you press
you can see the actual
time and the graphic programme for the selected zone. To see others zones use
and
keys.
Reduce
Mode:
Use this mode to put your installation indefinitely in reduce mode.
The room temperature and the humidity level are displayed all the time. If you press
you can see the delta
temperature (difference between the comfort temperature and reduced temperature).
You can adjust the delta temperature (dt) with
and
keys. (Default setting 4°C)
Every others zones will follow there thermostat setting temperature minus or plus (depending of your choice on the
receiver) the dt
Example for one zone =>comfort temp. 22°C –/+ dt (4°C) = the reduced temperature for this zone will be 18°C
Anti-Freeze Mode:
Use this mode to protect your installation against freeze.
The room temperature and the humidity level are displayed all the time. If you press
you can see the setting
temperature and the time.
You can adjust the anti freeze temperature with
and
keys. (Default setting 6°C)
Every others zones will follow this setting temperature.
Holiday Mode:
Use this mode for an absence period. (For your holiday per example)
To access to this mode place your thermostat in Anti-Freeze mode
, push the
key, the
is displayed
Now you can adjust with
and
the period duration. (In hours “
H
” if below 24h then in days “
d
”).
When the period is finish the thermostat will come back automatically in
mode.
If you want to interrupt this period, adjust the duration to “
no
”.
The temperature applied for this duration is the temperature value adjusted in anti-freeze mode
.
Operating Mode
(only available if
H.C: Menu
parameter is activated):
Use
to select «
Mod HEAT
»
for heating application only (or in winter season with manual reversible
Heat and Cold system).
Use
to select «
Mod COOL
»
for cooling application only (or in summer season with manual
reversible Heat and Cold system)
Use to select «
Mod Auto
»
for automatic reversible heat and cold system.
Set Clock Menu:
Use this mode to adjust the clock and day.
Press
, to adjust the minute with
and
keys.
Press
, to adjust the hour with
and
keys.
Press
, to adjust the day with
and
keys.
Program Menu:
Use this mode to assign or edit a program for each zones of your installation.
(See the PROGRAM EDITION menu for more explanation)
By pressing
key the zone number starts to blink,
Use
/
to see the
With
/
you can Select
other days of the program
The zone or the User program.
(See
User
program
edition)
Program
number
Shows
the
daily
program
If you select a zone number “
01
” to “
12
” and press
, you can then select a weekly program to be followed for
this zone.
The program numbers start to blink:
Use
/
to select the program.
If you select a built in program
“P1”
to
“P9”
or a user program
“U1”
to
“U12”
, and press
, then this program
will be followed in
mode.
Built-in programs description
P1:
Morning, Evening & Week-end
P6:
Morning, Afternoon & Week-end
P2:
Morning, Midday, Evening & Week-end
P7:
7h - 19h (Office)
P3:
Day
&
Week-end
P8:
8h – 19h , Saturday (Shop)
P4:
Evening & Week-end
P9:
Week-end (Secondary House)
P5:
Morning, Evening (bathroom)
User programs edition:
1/ Program editing:
First of all, select a user program (
U1
to
U12
) with
and
keys. Press
, the first cursor of the program
graphic starts to blink. Then, you can choose the state of temperature (
or with
+/-
keys)
at the current hour.
Use
and
keys to slide the blinking cursor position in the day and modify or correct easily the program.
When the displayed day is correct, press
to jump to the following day.
When you press
on day 7 you return to the top menu .Now your user program will be followed if you select
this user program for a zone and put your thermostat in
operating mode.
2/ Program assigning:
You can also assign a different program at each zone, to do this, select a zone (
01
to
12
) with
and
keys,
the zone number blinks, then press
, now the program number blinks, you can select with
and
the
program which will be followed by the selected zone.
PROGRAM EDITION
In order to configure the RF-thermostat with the receiver,
-
the receiver must be in the “
RF init
” mode (see the receiver leaflet for more explanation)
- Press
the key during 5sec to enter the parameters menu.
When “
CrF init
” and the graphic
appears the thermostat send the radio
configuration at the receiver.
-
Once the receiver is configured press
key to come back in the main menu
PAY ATTENTION!!!
The thermostat has to be placed near to the receiver for correct configuration.
RADIO CONFIGURATION (Link emitter with the receiver)
day
Hour at the cursor
position
The
key sets temperature at the current blinking program hour
The
key sets
temperature at the current blinking program hour
