![background image](http://html.mh-extra.com/html/watts/lc-150-series/lc-150-series_manual_877050033.webp)
33
5. Press the Up button. Use this display to view the Volume Used
since the last regeneration cycle. This option setting is identi-
fied by “VU” in the upper left corner of the screen.
6. Press the Up button. Use this display to view the Reserve
Capacity. This option setting is identified by “RC” in the upper
left corner of the screen.
Figure 30
Figure 32
Figure 33
SXT Diagnostics - Cont’d
Figure 31
7. Press the Up button. Use this display to view the Total Volume
data. This option is identified by “TV” in the upper left corner of
the screen.
8. Press the Up button. Use this display to view the Software
Version. This option setting is identified by “SV” in the upper
left corner of the screen.
9. Press the Extra Cycle button to end Diagnostic Programming
Mode.
Содержание LC-150 Series
Страница 14: ...14 Wiring Diagram SXT ...
Страница 16: ...16 NXT2 Controller Display ...
Страница 52: ...52 Injector Flow Data and Draw Rates Down Flow ...