background image

Standards

–  Watts WaterPEX

®

 CinchClamps are manufactured in accor-

dance with American Society for Testing and Materials 

(ASTM) F-2098.

–  Watts WaterPEX

®

 Fittings are to be manufactured in accor-

dance with American Society for Testing and Materials 

(ASTM) F-1807, F-2159, and F-2434.

– Only for use with PEX manufactured to ASTM F-876/F-877

Holster

Manual  

CinchClamp™ Tool

Gauge

Calibration Bar

Manual CinchClamp™ Tool with work pouch and calibration gauge. 

Calibration gauge and calibration bar are located in side pouch.

Gauge and 

Calibration 

Bar Pouch

For Residential and Commercial Applications

ES-WP-WPCCT-2

Job Name   ––––––––––––––––––––––––––––––––––––––––––– 

Contractor   ––––––––––––––––––––––––––––––––––––––––––––

Job Location   ––––––––––––––––––––––––––––––––––––––––– 

Approval   –––––––––––––––––––––––––––––––––––––––––––––

Engineer   ––––––––––––––––––––––––––––––––––––––––––––– 

Contractor’s P.O. No.   –––––––––––––––––––––––––––––––––––

Approval   ––––––––––––––––––––––––––––––––––––––––––––– 

Representative   ––––––––––––––––––––––––––––––––––––––––

Model WPCCT-2

Manual CinchClamp™ Tool 

Sizes:  

3

8

", 

1

2

", 

5

8

", 

3

4

" (10, 15, 18, 20mm)

The Watts Manual CinchClamp™ Tool is designed for use with 

tubing and CinchClamp™ connections.

Specifications

Connections shall use Watts brass and poly-alloy crimp 

fittings and Watts WaterPEX

®

 cross-linked polyethylene pipe.

Installation

All CinchClamps must be installed using a Watts CinchClamp 

Tool and in accordance with all installation guidelines.
– Make sure the Watts WaterPEX

®

 has a clean, square cut end.

– Slide the CinchClamp over the Watts WaterPEX

®

.

–  Insert fitting and position CinchClamp, allowing for  

approximately 

1

8

" clearance between clamp and fitting.

–  Position the open jaws of the Manual CinchClamp Tool over 

the tabs of the CinchClamp and squeeze. 

Tool will release 

when cinch is complete.

If connections are made in temperatures below 30°F, 

caution must be taken to cinch slowly between ratchets,  

allowing the Watts WaterPEX

®

 to form a proper seal 

against the barb. 
Do not use the Manual CinchClamp Tool to remove 

CinchClamps. This will cause damage to the tool, result-

ing in improper connections. 

 Model 

desCriPTion

 

WPCCT-2 

Manual CinchClamp™ Tool

Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, 
please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials with-
out prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.

Отзывы: