Modulex Light Commercial Series
CHAPTER 9: Spare Parts Drawings and Lists
OMM-0158_A
• 6/28/2022 Technical Support • (800) 526-0288 • Mon-Fri, 8 am - 5 pm EST Page
102
of
120
8.10 Unit Disassembly
To disassemble the unit for maintenance, do the following:
Disassembling the EXT Boiler for Maintenance
1. Switch OFF external electrical power and CLOSE the gas supply valve upstream from the
boiler, and ensure it is completely closed.
2. Unlatch and raise the top lid (Figure 8-4).
3. Remove screws from top of unit holding the rear and side panels in place (Figure 8-5).
Remove panels by tilting away from unit, then lifting up and out (Figure 8-6). Note, the front
and rear panels must be removed before the side panels can be removed.
Figure 8-4: Unlatch Top Lid (Step 2)
Figure 8-5: Remove Screws at Edges and Remove Side and Rear Panels (Step 3)
Figure 8-6: Remove Panels (Step 3) Figure 8-7: Remove Flue Assembly (Step 4)
