WATTECO BoB Assistant, Справочное руководство

Страница: 36 / 57

Bob Assistant - Reference Manual
2023-04-04 - Version 1.0 36
3.5. STATE MESSAGE
3.5.1. payload structure
(STATE message is the first applicative payload sent by the device after power-on)
Evolutions compared to previous version of the device
are in red in the following table
Byte
Definition / codec
attribute
Value (dec) Real_Value (dec)
Unit Range Type
Comments
0 Header / startstop 83 N/A
hex=0x53 => S tate header
1 sensor & machine
states /
state
100~101;
104~105;110 ;125~126
(Value) N/A 100: Sensor start;
101: Sensor stop;
104: Keep alive sent during the vibration testing cycle,
there is not enough vibration to start learning
105: Vibration testing cycle timeout, device goes to
poweroff
106: Learning mode keep alive message, sent when the
machine goes off for a long time during a learning
session
110: Machine stop with flash erase
125: Machine stop;
126: Machine start
2 Battery
percentage /
batterypercentage
0~127 Value*100/127 % [0,100] integer Remaining battery level
The codec will calculate the battery level and return it in
the “ batterypercentage ” attribute