WATTECO BoB Assistant, Справочное руководство

Страница: 21 / 57

Bob Assistant - Reference Manual
2023-04-04 - Version 1.0 21
Once the STATE message is sent, the LED will show the following
sequence:
2.2.4. Battery value reset
After changing the battery (see §2.3 Battery Replacement ), it is possible to reset the battery level sent in
the frames by the device.
There a 2 possible ways, either by downlink (see §4.5 Reset battery value ) or by using the button, once
the device has re-started (initialization phase is done, the device is connected to the network).
Reset battery value
Repeat 5 times:
→
Press the button, wait 1s, then press the button again
After 5 consecutive button press, the device will then display 5x white Led
blinks
BoB ASSISTANT will then send the STATE message to warn that it erased the
knowledge data and gets Off ( can take up to 10 minutes )