Wattbike Exercise Bike, Руководство пользователя

Страница: 19 / 32

19
Setup
Press ENTER - In Setup you can go into the Memory and Delete all
or Delete last session and also change the Sample rate per second
to OFF (session will not be saved), 25 samples, 50 samples or 100
samples. Use the up/down keys on the WPC to scroll through the
displays and ENTER to select an option.
The WPC is equipped with 2Mb internal memory which has the
capacity to store 175 minutes of data with a resolution of 100
samples per second. It is possible to increase the WPC’s storage
capacity by reducing the sample rate to 50 or 25 samples per
second.
For general exercise the 25 sample setting is appropriate. For
cycling enthusiasts, professional cyclists, coaches and sports
scientists, particularly if using Wattbike Expert Software, a higher
sampling rate may be necessary.
The Wattbike Performance Computer only stores 40 sessions,
irrespective of the length of the sessions and when full deletes
the latest session first.
It is recommended that the data is backed up regularly, either
to the logcard or direct to Wattbike Expert Software, and the
memory cleared regularly.
Setting the Zero State of the Monitor
Whilst the Wattbike is factory calibrated there is a function to Set
zero from the Wattbike Performance Computer. This can be used
to ensure that the Wattbike has been returned to zero prior to
testing.
Select
Setup
from the Main menu, then
Memory
and simultaneously
press all four buttons.
Rotate the pedals backwards for a few revolutions to unload the
Wattbike. The cranks should be unladened and in a horizontal
position
Press
ENTER – the monitor will automatically Set Zero.
100 samples per second
50 samples per second
25 samples per second
175’
350’
700’