7
Need help or have any questions? Call us at 1-714-963-0329 or send us an Email at [email protected]
We have organized the parts as they come out of the box for easier identification during assembly. Before you begin
assembly, group the parts as we list them below. This will ensure that you have all of the parts before you begin assembly
and it will also help you become familiar with each part. If you find any parts missing or damaged, please contact us below:
AIRFRAME ASSEMBLIES
❑
(1) Right & Left Fuselage Halves
❑
(1) Right & Left Wing Panels
❑
(1) Right & Left Horizontal Stabilizer Panels
❑
(1) Vertical Stabilizer
SECTION 3: KIT CONTENTS
MISCELLANEOUS FUSELAGE & WING PARTS
❑
(2) Fiberglass Wing Joiner Plates
❑
(2) Prepainted Canopy Mounting Board
❑
(1) Prepainted Servo Mounting Board (2 Parts)
❑
(2) M2 x 5 Wood Screws
❑
(1) Battery Tie-Down Strap
❑
(1) M3 x 8 Wood Screw
❑
(2) Brass Pins
❑
(1) Double-Sided Foam Tape
❑
(1) Decal Set
DUCTED FAN ASSEMBLY
❑
(1) 380 Modified Motor
❑
(1) Ducted Fan Shroud
❑
(1) Impeller Fan
❑
(1) Threaded Shaft Adapter w/Set Screw
❑
(1) Impeller Nut
❑
(2) M2 x 4 Machine Screws
❑
(3) Noise-Suppression Capacitors
MISCELLANEOUS STABILIZER PARTS
❑
(1) Prebent Elevator Joiner Wire
❑
(2) Nylon Bushings
❑
(1) Servo Extension Cord
❑
(1) Prepainted Tape Strip
❑
(1) Prepainted Servo Mounting Board
OPTIONAL LANDING GEAR ASSEMBLIES
❑
(3) Lightweight Wheels
❑
(2) Main Gear Wire Struts
❑
(1) Nose Gear Wire Strut
❑
(2) Nylon Main Gear Mounting Plates
❑
(1) Plywood Nose Gear Mounting Plate
❑
(1) Nose Gear Bushing Assembly
❑
(1) Nose Gear Steering Arm Assembly w/Set Screw
❑
(4) Wheel Collars w/Set Screws
❑
(4) M3 x 8 Wood Screws
❑
(4) M2 x 5 Wood Screws
Global Services
18480 Bandilier Circle
Fountain Valley CA 92708
Phone: (714) 963-0329 Fax: (714) 964-6236 Email: [email protected]
On the Web
http://globalservices.globalhobby.com
PLASTIC PARTS
❑
(1) Clear Canopy
❑
(1) Nose Cone
❑
(1) Battery Tray
❑
(1) Battery Cover
❑
(1) Radio Tray
Note:
Steering pushrod is made from scrap control
system pushrod wire.
CONTROL SYSTEM ASSEMBLIES
❑
(3) M1.5 x 150 Threaded Wires
❑
(3) Nylon Clevises
❑
(3) Nylon Control Horns
❑
(3) Nylon Control Horn Backplates
WARNING
The MiG-15 EDF is constructed of foam. It is very important that you use no solvents, Cyanoacrylate (C/A) glue, or paint
that can damage foam. If any of these chemicals comes in contact with the foam parts, the parts will be destroyed and will not be
covered under warranty. Use only epoxy where glue is required. If you decide to add painted details to the airplane, use acrylic-
based paints and always test the paint on a scrap piece first.
W
e
stock a complete line of replacement p
art
s for your W
att
age MiG-15 EDF
. Please refer to p
a
ge # 38 for more det
ails.
