7
Visit our website at http://watt-age.globalhobby.com for information on other Wattage products
Step 3: Connecting the Pushrod Wires
❑
Install the pushrod wire into the vertical tail control
horn by first gently twisting the control horn up, then
carefully flexing the pushrod wire until you can insert the
end of the wire into the outermost hole in the control horn.
We suggest installing the pushrod wire
into the outermost hole in the control horn for your first
few flights. This will make it easier to control the
airplane. Once you're proficient at flying the airplane,
you can move the pushrod wire into the middle or
inner hole to increase the control response.
PRO TIP
❑
Install the pushrod wire into the horizontal tail control
horn by first gently twisting the control horn back, then
carefully flexing the pushrod wire until you can insert the
end of the wire into the outermost hole in the control horn.
We suggest installing the pushrod wire
into the outermost hole in the control horn for your first
few flights. This will make it easier to control the
airplane. Once you're proficient at flying the airplane,
you can move the pushrod wire into the middle or
inner hole to increase the control response.
PRO TIP
Step 4: Installing the Landing Gear
❑
Install the landing gear by simply pushing the wire firmly
into the molded plastic slot in the bottom of the fuselage.