DIP SWITCH SETTING
The UT-355 has 5 DIP switches under the cover.
Time Delay: Switches 1, 2, 3
The sensor will hold the lights
ON
as long as
occupancy is detected. The time delay countdown
starts when no motion is detected. After no motion
is detected for the length of the time delay, the
sensor will turn the lights
OFF
.
Walk Through: Switch 4
Walk-through mode turns the lights
OFF
three
minutes after the area is initially occupied, if no
motion is detected after the first 30 seconds. If
motion continues beyond the first 30 seconds, the
selected time delay applies.
Service: Switch 5
To override all sensor functions, set DIP switch 5 to
the ON position. The green LED will come on and
stay on for the duration of the override.
This bypasses the light level and occupancy
detection control functions of the sensor.
Switch#
5 minutes
10 minutes
15 minutes
20 minutes
25 minutes
30 minutes
30 seconds
1 2 3
Time Delay
Test Mode/20 min
5
Normal
Service
Service
= ON
= OFF
= Factory Setting
4
Disabled
Enabled
Walk-Through
Feature
www.wattstopper.com
