watt box WB-200-IPCE-3, Руководство пользователя

Страница: 3 / 12

WATTBOX™ WB-200-IPCE-3 Installation and Users Manual
pg.3
© 2012 Wattbox ™
MOUNTING OPTIONS
Structured Wiring Cabinet.
The WB-200 can be installed in a Structured Wiring Can using the supplied Module Mounting Pins.
LED OPERATION
PROTECTED
AUTO REBOOT
SYSTEM STATUS
INTERNET
POWER
GROUNDED
PROTECTED
AUTO REBOOT
SYSTEM STATUS
INTERNET
POWER
GROUNDED
WB-400-IPCE-8
PROTECTED
AUTO REBOOT
SYSTEM STATUS
INTERNET
POWER
GROUNDED
WB-400-IPCE-8
TM
Green (Solid): All sites/IP Addresses are communicating with the WattBox
Green (Flashing):
At least 1 (not all) Sites/IP Addresses are communicating with the
WattBox
Red (Solid): None of the Sites/IP Addresses are communicating with the WattBox.
When Illuminated:
Auto Reboot is Enabled, WattBox will perform power cycle for outlets that
are ON when communication with the assigned Website/IP Address is lost.
Note that outlets that are OFF, will not power cycle.
When Not
Illuminated:
Auto Reboot is Disabled, no power cycle will occur when communication
with the assigned Website/IP Address is lost.
Green (Solid):
WattBox processor is in an operating state and can be accessed via the
WattBox interface
Green (Flashing):
Firmware for the WattBox processor is being updated, during this state
the WattBox cannot be accessed via the WattBox interface.
Red (Solid):
WattBox processor is NOT in an operating state, reset button must be
pressed to return the WattBox to an operating state.