Desk Assembly: Verve
Page 2 of 2
M2
Step 1
Align the two halves of the Verve
worksurface.
Step 2
Slip the joint connectors into the
pockets and use the thin rod
provided to tighten the ball
shaped nuts. Make sure the top of
the two halves of the worksurface
are tight and flush.
Step 3
Drop steel hat channel in
place and secure with
1/4-20 x 3/8" machine
screws (FIG-2).
Finish assembly by
attaching support
tubes and legs as
shown on page 1.
1/4-20 x 3/8"
machine screw
3/8"
PRODUCT INSTALLATION:
INS30100
M2
WATSON DESKING
800.426.1202
www.watsondesking.com
FASTENER KEY
F
IG
-2
