2 Seven Assembly | INS-Seven-USER | watsonfurniture.com
IMPORTANT SAFETY INFORMATION
THIS PRODUCT IS FOR COMMERCIAL USE ONLY.
Important information on Seven products can be found
under the following headings:
DANGER
To reduce the risk of electric shock, always unplug this
furnishing from the electrical outlet before cleaning.
WARNING
To reduce the risk of burns, fire, electric shock, or
injury.
1. Unplug from outlet before putting on or taking off
parts.
2. Close supervision is necessary when this furnishing
is used by or near children, invalids, or disabled
persons.
3. Use this furnishing only for its intended use
as described in these instructions. Do not use
attachments not recommended by the manufacturer.
4. Never operate this furnishing if it has a damaged
cord or plug, or if it is not working properly.
5. Keep the cord away from heated surfaces
6. Do not use outdoors.
7. Risk of Electric Shock --- Connect this furnishing
to a properly grounded outlet only. See Grounding
Instructions, page 6.
8. The worksurface has a maximum weight capacity of
250 lbs., including worksurface weight.
9. Do not use the actuator system for lifting persons.
Do not stand or sit on the table while operating --- Risk
of Personal Injury.
10. Note that during construction applications in which
the actuator is to be fitted, there must be no possibility
of personal injury, for example the squeezing of fingers
or arms.
11. Do not overload the actuators --- this can cause
danger of personal injury and damage to the system.
12. Electrical connection between table segments shall
be disconnected prior to removal of a mechanical
connection.
13. Cords are not to be routed through or across to
another complete unit or worksurface. Channel is not
to be used for routing extension cords.
14. The combined length of a Seven furnishing
configured with a power raceway furnishing shall not
exceed 30 feet (9.1 m), or 12 segments of standard
power, 6 segments of heavy power.
15. This product is for use on a nominal 120-volt supply
circuit. When factory-equipped with NEMA 5-20P plug,
make sure that the product is connected to an outlet
having the same configuration as the plug. No adapter
should be used with this product.
16. To reduce the risk of electric shock, this furnishing
has a polarized plug (one blade is wider than the other).
This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug.
If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not change the plug in any
way.
17. Servicing of Double-Insulated Products In a double-
insulated product, two systems of insulation are
provided instead of grounding. No grounding means is
provided on a double-insulated product, nor is a means
for grounding to be added to the product. Servicing a
double-insulated product requires extreme care and
knowledge of the system, and is to be done only by
qualified service personnel. Replacement parts for a
double-insulated product must be identical to the parts
they replace. A double-insulated product is marked
with the words “DOUBLE INSULATION” or “DOUBLE
INSULATED.” The symbol (square within a square) is
also able to be marked on the product.
CAUTION
1. Assure free space for movement of application in
both directions to avoid blockade.
2. Do not use the system in environments other than
intended indoor use.
Pl ea s e Read Al l In stru ction s B efo re Usi ng
Содержание SEVEN
Страница 1: ...USER MANUAL SEVEN V 2 2 4 16 INS SVN USER...
