WATSON Mastermind Flow, Сборка

Страница: 2 / 26

2
Important Safety Instructions
This product is for commercial use only.
Maximum intended load for each worksurface is 200 lbs (91 kg)
When using an electrical furnishing, basic precautions should always be followed, including the following: Read all
instructions before using (this furnishing).
DANGER
To reduce the risk of electric shock:
1. Always unplug this furnishing from the electrical outlet before cleaning.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:
1. Unplug from outlet before putting on or taking off parts.
2. Close supervision is necessary when this furnishing is used by, or near children, invalids, or
disabled persons.
3. Use this furnishing only for its intended use as described in these instructions. Do not use attachments
not recommended by the manufacturer.
4. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water. Return the furnishing to a service center for examination and
repair.
5. Keep the cord away from heated surfaces.
6. Do not use outdoors.
7. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
8. To disconnect, turn all controls to the off position, then remove the plug from outlet.
9. Risk of Electric Shock – Connect this furnishing to a properly grounded outlet only. See Grounding
Instructions (Fig. 1).
10. Mount furnishings at the correct height.
11. Risk of Fire or Electric Shock. It is possible for this office furnishing system to be connected to more than
one source of supply. Disconnect all sources prior to any servicing. A single circuit shall not be powered
by more than one source.
Metal Screw
Tab for
Grounding Screw
Adapter
Grounded
Outlet Box
Grounded
Outlet
Grounded
Outlet
Grounding
Pin
Grounding Methods
(Fig. 1)