9 HAVEN RECHARGE BENCH ASSEMBLY INSTRUCTIONS
a.
b.
Optional Oblong Surface
Place the Oblong Surface upside down on a soft surface. Attach the mounting plate and stem by aligning the plate
with the pilot holes, making sure the table stem is justified to the outside of the table. Secure the plate with (6) screws
(0002148) (a.). Place the table assembly through the center hole in the support rail of the bench. From the underside of
the support rail, slide the plastic washer over the table stem (0002165), the the metal washer (0001567), and spin the
nut (0001248) onto the stem by hand. Use a socket to fully tighten the nut and fully secure the Oblong Surface (b.).
5.
M8 Plastic Washer
(0002165)
#10 X 5/8 Pan Head
Screw (0002148)
M8 Nylock Nut
(0001248)
M8 Washer, 23mm
OD (0001567)
