6 | Charger Operation
CHARGING OPERATION
9V BATTERIES:
1
Insert 1 or 2 9V NiMH batteries into
battery slots, oriented according to the
polarity symbols (+ or -) that are marked
on the battery.
2
Pull out the flat AC plug 90 degrees, and
plug it into an electrical outlet matching
the input specification shown in this
manual.
3
The charger will perform a self-test when
the power is first connected. The LED
will come on shortly and then go off to
indicate ready status.
4
Battery charging is initiated
automatically when batteries are
inserted. A normal battery is indicated
by a solid red light. The charger will
begin charging if normal batteries are
detected.
