Watson-Marlow qdos 20, Инструкция по эксплуатации

Страница: 151 / 235

15.2.7 Cyclic Data Read (from pump to master)
Cyclic data read (from pump to Master)
16 bit Byte 1, 2 Status Word
16 bit Byte 3, 4 Pumphead Measured Speed (unsigned)
16 bit Byte 5, 6 Hours Run
16 bit Byte 10,9 Number of full motor revolutions
16 bit Bytes 8,7 Reserved
32 bit Byte 13, 14, 15, 16 Fluid Level
32 bit Byte 17, 18, 19, 20 Unassigned
32 bit Byte 21, 22, 23, 24 High pressure alarm
32 bit Byte 25, 26, 27, 28 Low pressure alarm
Status Word
Bit Description
0 Motor running (1= Running)
1 Global Error Flag (1= Error)
2 Fieldbus Control (1= Enabled)
3 Reserved
4 Over current error
5 Under voltage error
6 Over voltage error
7 Over temperature error
8 Motor stalled
9 Tacho fault
10 Leak detected or pumphead alert for ReNu 20 PU
11 Low Setpoint- Out of range
12 High Setpoint- Out of range
13 Fluid level alert
14 Reserved
15 Reserved
15 INSTALLATION: PART 6 (SETTING UP THE PUMP (CONTROL SETTINGS)) 151