WATLOW ELECTRIC MANUFACTURING COMPANY
Installation & Maintenance Manual for MULTICELL
TM
Heaters
I&M MANUAL No: 316-42-21-1
Page: 11
Date: 3/15/2017
Rev: 5.00
WATLOW ELECTRIC MANUFACTURING COMPANY - 6 INDUSTRIAL LOOP RD.
– HANNIBAL, MO 63401 - PHONE 573-221-2816
Original Instructions (English)
Orientation and Mounting
CAUTION
Care should be taken to ensure all mounting features are tight.
WARNING
Avoid incorrect handling and installation of the component parts. For example, do not
lift the heater by the leadwires and avoid direct contact with fiberglass insulation.
WARNING
Electric heaters are capable of developing high temperatures, so to minimize the
risk of fire extreme care should be taken to locate the heater in a safe location and
environment.
Ensure that combustible materials are maintained far enough away from the
Product to ensure that they are free of the effects of high temperatures.
This Product is not suitable for use in Hazardous (Classified) Locations.
CAUTION
Heater orientation can be important in order to ensure intended heat transfer and
safe operation. Refer to the documentation for the thermal system design for the
proper orientation and ensure that the heater is installed accordingly. Observe any
markings on the flange that may indicate required orientation, for example “TOP”.
The Hi limit sensor and baffle orientation (if so equipped) is critical!
Care should be taken to allow enough room for heater expansion without
compromising heat transfer.
