Watlow 942 Series, Руководство пользователя

Страница: 3 / 63

Appendix WATLOW Series 985 User's Manual
3
Page Item
Chapter 1
4 Starting Out With The Watlow Series 942-
4 General Description
5 Opening the 942
5 Set the DIP Switches
Chapter 2
6 How To Install And Wire The Series 942-
6 System Planning
6 Installation Information
7 Dimensional Information
8 Wiring The Series 942
8 Sensor Installation Guidelines
9 Input Wiring
11 Output 1 Wiring
15 Output 2 Wiring
17 Auxiliary Wiring
20 System Wiring Example
Chapter 3
21 How To Use the Keys And Displays
Chapter 4
22 How To Setup The Series 942
22 Entering The Setup Menu
23 Setup Parameters
28 Operation Menu and Parameters
Chapter 5
31 Programming the Seres 942
31 Program Menu
32 Program Parameters
34 Running the Series 942
35 Resume a Profile
36 Event Outputs
37 Multiple Profiles
37 Jumploops
38 Programming a Ramping Profile
38 Running Your Profile
39 Editing Your Profile
Chapter 6
How To Tune and Operate
40 Tuning - Automatic and Manual
42 Changing the Auxiliary Jumper Position
42 Using Alarms
44 Error Code Messages & Actions
Appendix 1
46 Specification
48 Model Number Information
Appendix 2
49 Installation Guidelines For Preventing Noise
51 Eliminating Noise
52 Checking For Ground Loops
52 Noise Suppression Devices Available…
53 Line Filtering Configurations For Controls
Appendix 3
54 Entering the Calibration Menu
56 Calibration Procedures
64 Glossary
66 Index
67 Warranty/Returns
Contents
Figures, Tables, Charts
Page Item
Figure
4 Series 942 Input & Output Overview 1
5 How to Open the Series 942 2
5 DIP Switch Location and Orientation 3
6 Overview of the Series 942 4
8 Series 942 Faceplate Dimensions 5
8 Series 942 Panel Cutout Dimensions 6
8 Series 942 Sideview Dimensions 7
9 120 VAC Power Wiring 8
9 240 VAC Power Wiring 9
10 Thermocouple Wiring Diagram 10
10 RTD Wiring Diagram 11
11 0 - 5 Process Input Wiring Diagram 12
11 4 - 20 Process Input Wiring Diagram 13
12 Solid State Relay, Output 1 Wiring 14
12 DC (Open Collector) Output 1 Wiring 15
13 6 Amp Mechanical Relay, Output 1 Wiring 16
13 4 - 20mA Process, Output 1 Wiring 17
14 0 - 5VDC Process, Output 1 Wiring 18
14 S.S. Relay, w/o contact supp., Output 1 19
15 S.S. Relay, Output 2 Wiring Diagram 20
15 DC (open Collector), Output 2 Wiring 21
16 6A Mechanical Relay, Output 2 Wiring 22
16 S.S. Relay, w/o contact supp., Output 2 23
17 Auxiliary Option 1, 1 - 6 Amp Relay 24
17 Auxiliary Option 2, 2 - 6 Amp Relays 25
18 Auxiliary Option 3, 6 Amp Relay/0-5ret. 26
18 Auxiliary Option 4, 6 Amp Relay/4-20ret. 27
19 Auxiliary Option 5, None/0-5Retransmit 28
19 Auxiliary Option 6, None/4-20mA Retransmit 29
20 System Wiring Example 30
21 Series 942 Keys and Displays 31
22 Entering the Setup Menu 32
22 The Setup Menu 33
28 The Operation Menu 34
31 The Program Menu 35
34 The Run Menu 36
37 Guaranteed Soak Deviation Example 37
42 Auxiliary Jumper Location 38
43 Deviation Alarm Example 39
43 Alarm Display Examples 40
44 Error Code Display Example 41
53 Differential Mode Filter Wiring 42
53 Common Mode Filter Wiring 43
53 Combination Filter Wiring 44
54 The Calibration Menu 45
55 Calibration Parameters 46
Tables
26 Input Ranges 1
27 Setup MenuParameters/Description 2
30 Operation Menu Parameters/Description 3
38 Series 942 Ramp and Soak Profile 4
39 Editing Your Profile, steps 4 - 7 5
52 Noise Suppression Device Ratings 6
57 RTD Settings 7
Charts
35 Master Step Chart 1