Watkiss Automation PowerSquare 200, Руководство пользователя

Страница: 60 / 80

6 - Maintenance - Clean the PowerSquare
56
Watkiss PowerSquare™200 User Manual
Operator Maintenance Plan
Clean the PowerSquare
Introduction
Clean the PowerSquare every week to remove surface dust.
CAUTION Only clean the machine with materials that are recommended in this manual.
Do not use other chemicals or abrasive material.
Outside of the PowerSquare
Use a moist cloth to clean the outside of the PowerSquare.
Touch screen
Clean the touch screen with a clean, dry cloth. Never use an abrasive material
or chemical to clean the touch screen. Light pressure with a clean, dry cloth is
enough to remove fingerprints. Do not use too much force.
Clean the Static Elimination Bars
Introduction
Clean the static elimination bars every week. This action extends the perform-
ance and service life of the static elimination bars.
The PowerSquare is supplied with a small brush. Use the brush to clean the
static elimination bars.
There are three static elimination bars.
• one in the connecting bridge
• two in the gathering area
Interval Task Reference
• Every week Clean the machine. See page 56
Clean the static elimination
bars. See page 56
• Every month, or
• When a new stitch-wire is
installed if this interval is shorter.
Lubricate the stitch head. See page 60