WATEX Ltd., Latvia, Riga, Ganibu dambis 27 k-5,
, Tel. +371 67381989, www.watex.eu
12
External In-Line Mixing valve (option)
You can use the external in-line mixing valve on water softeners to blend a desired amount of hardness back in the line or use it
on a carbon filter to blend a small amount of chlorine back in the line.
Electrical connections
The softener is supplied with electricity transformer (AC adapter), which operates at 220 V. Power supply to the softener must
be continuous. AC adapter is designed for dry places only.
Note:
All electrical connections must comply with local regulations.
To ensure a continuous supply of electricity from the source located not farther than 2 meters from the water softener.
Adapter wire must be
connected
inside the control valve.
1.
Remove the front cover of the control valve.
2.
At the top of release the middle mounting tab that keeps the motherboard frame to the control valve.
3.
On the right side of the plastic wall of the control valve there is a hole through which to pull the transformer’s
(adapter’s) tip.
4.
The tip to be connected to the contact terminals at the right lower part of the motherboard.
5.
The rest of the cable should be placed along side the frame of the motherboard behind the specially designed clamps.
6.
Push back the motherboard-mounting frame to fastening tab and secure it in the original position.
7.
Install the front button cover.
