WATER FILTER SYSTEMS
NAME AND
PART NUMBER
SIZE &
MICRON RATING
CHLORINE/CHLORAMINE
TASTE AND ODOR REDUCTION CAPACITY (*)
PRESSURE DROP SPEC
Infinity Sentinel
INF-SEN1
8” x 40”, 3.0
Nominal 3 micron rated filter to treat >250,000 gallons (946,353 Liters) of water @ 15 gpm (56.78
LPM) with greater than 90% reduction, estimated capacity using 2ppm of free chlorine.
5 psid @ 15 GPM
Infinity Guardian
INF-GUARD1
8” x 40”, 3.0
Nominal 3 micron Chloramine rated filter to treat >50,000 gallons (189,271 Liters) of water @ 7
gpm (26.50 LPM) with greater than 85% reduction, estimated capacity.
5 psid @ 15 GPM
*Claims are not performance tested by IAPMO or NSF. Performance claims are based on independent laboratory and manufacturer’s internal test data.
Actual performance is dependent on influent water quality, flow rates, system design and application. Results may vary.
This pressure vessel is tested and certified
by NSF International against NSF/ANSI
Standard 44 and 61 for materials and
structural integrity requirements
SPECIFICATIONS
IMPORTANT
DO NOT USE extra lubricants, unapproved sealants and tools to
tighten hand tightened only parts. Use of tools other than hand
tighten only parts voids warranty. Flush the system and change the
filter as suggested. The contaminants or other substances removed
or reduced by this water filter are not necessarily in all users’ water.
Filter Replacement Operating Instructions: New cartridges must
be flushed for a minimum of 10 minutes prior to use. System and
installation to comply with state and local laws and regulations.
Do not use with water that is microbiologically unsafe or unknown
quality without adequate disinfection before or after the system.
Manufactured from NSF/ANSI standard 61 and California Prop 65
Compliant certified coconut shell carbon and raw materials.
