www.watersnake.com.au
9
FIT BOLTS DOWN THROUGH MOUNTING
PLATE AND FOREDECK.
A TOTAL OF SIX
BOLTS NEED TO BE
USED TO SECURE
THE MOUNTING
PLATE.
( 3 BOLTS ON EACH SIDE
OF THE MOUNTING PLATE)
Use 6mm or 1/4” bolts, washers and nylon locking nuts. All fasteners should
be made of 316-grade stainless steel.
PLEASE NOTE:
The threaded holes on the mounting plate make adding a quick release
bracket easier. You can use either hole but if you choose to use the threaded
holes it is recommended that you use threadlocker on the bolt threads during
installation.
Mounting
plate
Bolts
PLEASE NOTE:
Watersnake accepts no liability for personal injury or property damage caused
while fi tting this motor. Please wear appropriate protective clothing and
eyewear/face protection. Avoid contacting and/or inhaling fi breglass dust or
aluminium shavings.
PLEASE NOTE:
Your Watersnake motor does not come supplied with any mounting hardware.
Mounting hardware is only included with the optional Watersnake quick
release brackets
INSTALLATION
OPTION 1 ( DIRECT INSTALLATION )
Содержание STEALTH 54LB/48
